Electric Pump up to 20PSI for Inflatable Dock, Kayak, Paddle Board with Car 12V Power, AC Home Power 110-240V

Electric Pump with Detached Battery, DC12 Voltage Power and AC110-220V Home Power for Choice

H►Whole kit included:

►Description:

An electric pump for a paddle board is a device designed to inflate stand-up paddle boards (SUPs) using an electric motor. This pump is convenient because it saves time and physical effort compared to manual pumps. This is a 12-Volt, high-pressure Auto Electric pump. It features both an inflation and a deflation port and inflates up to 20 PSI. This dual stage pump is fantacy for use on inflatable stand-up paddle boards, inflatable kayaks, and inflatable docks. It is powered via a car plug or a detached battery or AC home power plug and includes a digital screen for easy to read real time monitoring, and a non-kinking hose.

►Steps to Inflate an Inflatable Boat

1. Preparation

   • Choose a Suitable Location: Find a flat, clean area free from sharp objects or debris that could damage the boat.
   • Lay Out the Boat: Unfold the boat and lay it flat on the ground. Ensure the surface is free of any sharp objects.
   • Check for Accessories: Gather all necessary accessories, including the air pump, hose, and any inflation adapters.

2. Valve Inspection

   • Locate the Valves: Identify all the inflation valves on the boat. Typically, there will be several valves for different chambers.
   • Inspect Valves: Ensure the valves are clean and in good condition. Make sure they are in the correct position for inflation.

3. Using the Air Pump

   • Select the Pump: Use an appropriate air pump for your inflatable boat. Options include hand pumps, foot pumps, or electric pumps.
   • Attach the Hose: Connect the hose to the pump and ensure it fits securely to prevent air leaks.
   • Attach to Valve: Connect the other end of the hose to the inflation valve. Use any necessary adapters to ensure a tight fit.

4. Inflation Process

   • Inflate Main Chambers First: Begin with the main buoyancy chambers. Inflate each chamber to about 70-80% capacity initially.
   • Check for Even Inflation: Make sure the boat is inflating evenly and there are no twists or folds.
   • Inflate the Floor: If the boat has an inflatable floor, inflate it next. Ensure it is firm but not over-inflated.
   • Inflate Secondary Chambers: Complete the inflation of the main chambers to full capacity. Then, inflate any secondary or auxiliary chambers fully.

5. Check Air Pressure

   • Use a Pressure Gauge: If available, use a pressure gauge to ensure each chamber is inflated to the manufacturer's recommended pressure. This is crucial to avoid over-inflation or under-inflation.
   • Manual Check: If a gauge is not available, use the hand test. The boat should feel firm to the touch but still have a little give when pressed.

6. Seal Valves

   • Close the Valves: Once the chambers are fully inflated and checked, close all the valves tightly to prevent air from escaping.
   • Double-Check Seals: Ensure all valve caps are securely fastened and there are no leaks.

7. Final Inspection

   • Check for Leaks: Listen for any hissing sounds and inspect the boat for air leaks.
   • Verify Firmness: Ensure the boat feels uniformly firm across all chambers.
   • Check Accessories: Verify that any attached accessories (e.g., seats, oars, motor mounts) are properly installed and secure.

►One and the Only Electric Pump for Paddle Board in the World:

Electric Pump up to 20PSI for Inflatable Dock, Kayak, Paddle Board with Car 12V Power, AC Home Power 110-240V Images